Shenzhen Anzewei Technology Co., Ltd
Shenzhen Anzewei Technology Co., Ltd
Add to Cart
| Type | GPS Module Development board |
| Country of Origin | CHINA |
| Brand | OTW |
| Chipset | UBLOX |
| Application | Positioning, surveying and mapping, etc |
| Operating mode | GPS+GLONASS+GALILEO+BDS+QZSS+SBAS |
| Baud rate | 4800bps-921600bps, Default 38400bps |
| NMEA messages | RMC, VTG, GGA, GSA, GSV, GLL |
| Update frequency | 1Hz-20Hz (default 1Hz) |
| Voltage | 3.6V~6.0V (typical 5V) |
| Power consumption | 80 mA @5V |
| Size | 35mm * 35mm * 15mm |
High Precision ZED-F9P RTK GNSS/GPS Receiver Board with SMA and USB Drone GPS Module Development Board.
| Model | ZED-F9P-05B-00 |
| Receiver type | GPS: L1C/A L2C GLONASS: L1OF L2OF Galileo: E1-B/C E5b BeiDou: B1I B2I QZSS: L1C/A L2C SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN |
| Algorithm | Integrated RTK algorithm |
| Agreement | NMEA-0183 Support: VTG, GLL, TXT ublox binary and NMEA Command |
| Available baud rate | 4800bps~921600bps (default 38400bps) |
| Channel | 184 |
| Sensitivity | Tracking: -167dbm Capture: -160dbm Cold start -148dBm Hot start: -157dbm |
| Cold start | Average 24 seconds |
| Hot start | Average 2 seconds |
| Accuracy | 0.01 m + 1 ppm CEP |
| Max Height | 50000m |
| Max Speed | 500 m/s |
| Max Acceleration | ≦ 4G |
| Regeneration | 1Hz -20 Hz (default 1Hz) |
| RAWX | Support multi-GNSS raw measurement data output |
| Port | 6PIN 1.0MM JST |
| Size | 35mm * 35mm * 15mm (+/- 0.5mm) |
| Voltage | 3.6V~6.0V (typical 5V) |
| Power Consume | 80 mA @5V |
| Humidity range | 5% to 95% non-condensing |
| Working Temperature | -40℃ to 85℃ |
| Storage Temperature | -40℃ to 105℃ |
